Support for MFC-L3770CDW
- The color of your printouts is not what you expected
- White spots
- Uneven color density across the page
- Toner scatter or toner stain
- Curled or wavy
- The faxes I send are always received with a vertical black line.
- Colors are light or faint on the whole page
- Ghosting images
- Blank page or some colors are missing. Show More Show Less
- Confirm the results about faxes that I sent and received.
- Add a Cover Page to Your Fax
- Send a 2-sided Fax from the ADF
- Send the Same Fax to More than One Recipient (Broadcasting)
- Combine Address Book Numbers
- Send a Fax in Real Time
- Send a Fax at the End of a Conversation
- Send a Fax Manually
- Send a Fax at a Specified Time (Delayed Fax)
- Send a Fax
- Check and Cancel a Pending Fax Show More Show Less
- Change the Fax Forwarding Number
- Forward Faxes Remotely
- Forward Incoming Faxes to Another Machine
- Turn Off Memory Receive
- Store Incoming Faxes in the Machine's Memory
- Shrink Page Size of an Oversized Incoming Fax
- Receive a Fax at the End of a Telephone Conversation
- Print the received faxes that are stored in memory. (Fax Storage)
- Can I print in monochrome if one of the color toners run out?
- Change Memory Receive Options
- Set the 2-sided Printing for Received Faxes
- Choose the Correct Receive Mode
- Set up my Brother machine to forward the received faxes to another location. Show More Show Less
- I cannot use Gmail for Email functions (such as Scan-to-Email) and Internet Fax (I-Fax)
- Change the Fax Forwarding Number
- Forward Faxes Remotely
- Forward Incoming Faxes to Another Machine
- Turn Off Memory Receive
- Set Fax Detect
- Store Incoming Faxes in the Machine's Memory
- What is Distinctive Ring and how do I program it?
- The message "ERROR" or "NG" appears on the Transmission Verification Report when I try to send a fax.
- Confirm the results about faxes that I sent and received.
- Shrink Page Size of an Oversized Incoming Fax
- Print a Fax Journal
- Print a Transmission Verification Report
- Change the Remote Codes
- Set the Fax Receive Stamp
- Set up Groups for Broadcasting
- Set a Remote Access Code
- Set Telephone Line Compatibility for Interference and VoIP Systems
- Change Memory Receive Options
- Set the 2-sided Printing for Received Faxes
- Set the F/T Ring Time (Fast Double-ring)
- Set the Number of Rings Before the Machine Answers (Ring Delay)
- Set up my Brother machine to forward the received faxes to another location. Show More Show Less
Other FAQs Category
A guide to navigating our most common questions